Knappa Repeater & Digipeaters

The Knappa VHF repeater consists of 2 Kenwood TK-760’s running about 10 watts with a Raspberry Pi controller using HamVOIP software. Antenna is a 17 foot Tram 1481 at about 25 feet. There is also a 16 channel Vertex VX-2200 UHF linking radio that is remotely controllable via the repeater.

There is a Winlink VARA/1200 baud packet gateway at the site, as well as an APRS IGate Digipeater.

Repeater 147.160+ with a Tone of 141.3
APRS 144.390
Winlink Gateway 144.960. Both modes use the same call of NA7Q-10